Glass fiber reinforced polymer composites are one of the most widely used composite materials. The addition of Coal ash to polymer matrix dramatically increases the overall mechanical strength of the composite material as compared to the polymer composite. In view of this, a method is proposed for mixing coal ash powder (size 52-75 μm) into resin and Ash reinforced polymer composites are fabric...

This review paper reported carbon nanotubes reinforced composites for biomedical applications. Several studies have found enhancement in the mechanical properties of CNTs-based reinforced composites by the addition of CNTs. CNTs reinforced composites have been intensively investigated for many aspects of life, especially being made for biomedical applications. The review introduced fabrication ...

Magnesium phosphate cement (MPC) has been proven to be a very good repair material for deteriorated concrete structures. It has excellent adhesion performance, leading to high bonding strength with old concrete substrates. This paper presents an experimental study into the properties of MPC binder as the matrix of carbon fiber sheets to form fiber-reinforced inorganic polymer (FRIP) composites....

Reinforced polymer composites have played an ascendant role in a variety of applications for their high meticulous strength and modulus the fiber may be synthetic or natural used to serves as reinforcement in reinforced composites. Glass and other synthetic fiber reinforced composites consists high meticulous strength but their fields of applications are restrained because of their high cost of...

in this study, the strain rate effect on the bending properties of fiber reinforced composites for three types of polymer composites namely phenolic resin reinforced by woven basalt fibers, woven carbon fibers, and woven basalt/ woven carbon fibers at a total volume fraction of approximately 35% has been determined. flexural tests have been conducted at low range of strain rates included 0.03 m...

The results presented in this paper explore the extent to which indentation in the interfacial region of polymer composites can be used to identify, unambiguously, an interphase of distinct elastic properties. Supporting evidence is presented in the form of AFM-indentation in the interfacial region of two polymer composites, a glass fibre-reinforced vinylester and a glass flake-reinforced polyp...

In the current scenario, natural fiber reinforced polymer nanocomposites are widely used in the areas of aerospace, automobile, sports and military sectors due to its multi-functional features like high specific strength, high corrosion resistance, flame resistance, improved mechanical properties and low cost when compared with artificial fiber reinforced composites. These polymer based nanocom...

Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through th...

We have prepared composites of polyvinyl acetate (PVAc) reinforced with solution exfoliated graphene. We observe a 50% increase in stiffness and a 100% increase in tensile strength on addition of 0.1 vol % graphene compared to the pristine polymer. As PVAc is commonly used commercially as a glue, we have tested such composites as adhesives. The adhesive strength and toughness of the composites ...

Polymer composites based on natural fillers are currently attracting great attention as alternative materials to glass or synthetic fibre reinforced plastics in several applications, mostly for automotive, appliance and packaging products. The main advantage of employing natural fibres is that these are biodegradable and renewable, and exhibit low cost, low density and high toughness. However t...